Phoenix Machinery Movers Rigging Stamping Presses Photo Gallery
-
Eccentric Gear Install
-
Gantry Set Up
-
Turnkey Installation Of 2200 Ton Stamping Press
-
Pulling Schuler Stamping Press
-
AIDA Stamping Press Turnkey Rigging
-
Removal 4000 Ton Press
-
Machinery Movers Placing Stamping Press Base
-
Machinery Movers Stamping Press Turnkey Industrial Relocation
-
Millwright Setup Stamping Press
-
Moving Rigging Installation Stamping Press
-
Rigger Gantry Work
-
Riggers Turnkey Installation Press Line
-
Riggers Installing AIDA Press
-
Riggers Placing Erie press
-
Rigger Standing Press
-
Rigging Assembly Erection AIDA Press
-
Rigging Stacking AIDA Press
-
Setting Press Crown
-
Transporting Heavy Haul Press Base
-
Transporting Stamping Press
-
Machinery Movers Installing Crown
-
Millwright Standing Press
-
Machinery Moving Setting Side Frames Bliss Press
-
Eccentric Gear Install
Installing eccentric gear in stamping press.
-
Gantry Set Up
Gantry set up during stamping press installation at tier 1 automotive supplier.
-
Turnkey Installation Of 2200 Ton Stamping Press
Rigging electrical mechanical. Including feedline leveling and alignment.
-
Pulling Schuler Stamping Press
Pulling stamping press base into staging area on 200 ton die cart.
-
AIDA Stamping Press Turnkey Rigging
Rigging, electrical and mechanical on a AIDA stamping press.
-
Removal 4000 Ton Press
Removal of a 4000 ton 4 post hydraulic press with a 550 ton lift and lock gantry.
-
Movers Placing Stamping Press Base
Installing base for a 2500 ton Danly press using our 550 ton gantry system.
-
Machinery Movers Stamping Press Turnkey Industrial Relocation
Standing up a Minster press using 2 Taylor lift trucks.
-
Millright Setup Stamping Press
Installation of a four post hydraulic press using a Taylor and a 7.5 ton Hyster.
-
Moving Rigging Installation Stamping Press
Installation of a stamping press in a concrete pit using a Taylor.
-
Rigger Gantry Work
Installing base for a 2500 ton Danly press using our 550 ton gantry system.
-
Riggers Turnkey Installation Press Line
Turnkey installation of a press line with transfer system and robots. Also, new pits and fencing were installed.
-
Riggers Installing AIDA Press
Installing a new AIDA press with a 550 ton gantry system and overhead crane.
-
Riggers Placing Erie Press
Installation of a 4 post Erie press through a rooftop access hole using a crane.
-
Rigger Standing Press
Standing up a 4 post hydraulic stamping press into a pit using a Taylor and an overhead crane.
-
Rigging Assembly Erection AIDA Press
Rigging the Crown of a AIDA press and erecting the side frames using a 550 ton gantry system.
-
Rigging Stacking AIDA Press
Installation of a new AIDA press.
-
Setting Press Crown
Installing crown on a 880 ton stamping press using our 550 ton lift and lock gantry system.
-
Transporting Heavy Haul Press Base
Transportation of a 2500 ton Danly press Base using a single drop 5 axle trailer.
-
Transporting Stamping Press
Transporting a Minster stamping press on our 5 axle single drop trailer.
-
Machinery Movers Installing Crown
Installing crown on a Bliss press with a 550 ton gantry lift and lock.
-
Millwright Standing Press
Standing up a press using our 550 ton gantry system.
-
Machinery Moving Side Frames Bliss Press
Rigging and setting side frames on a Bliss press using a boom on a Taylor.
